Other dryer series

Sketch：The hot air enters the bottom of the dryer tangentially, and is driven by the agitator to form a powerful rotating wind field. The paste material enters the dryer from the screw feeder.

Sketch：The CT-C series hot air circulation oven is equipped with a low-noise, high-temperature-resistant axial flow fan and an automatic temperature control system. The entire circulation system is fully enclosed,

Sketch：he medicinal GMP oven has three heating sources: steam, electricity, and electric steam. Use temperature: temperature is automatically controlled and recorded by a recorder;

Sketch：Boiling drying, also known as fluidized bed, is composed of air filter, heater, fluidized bed host, cyclone separator, bag filter, high-pressure centrifugal fan, and operating table.

Sketch：The working principle of the GFG series high-efficiency boiling dryer: After heating and purifying, the air is introduced from the bottom by the induced draft fan and passes through the perforated plate of the hopper.

Sketch：The airflow dryer is a large-scale drying equipment. It uses the principle of instant drying and uses the rapid movement of the heat-carrying air to drive the wet materials and suspend the wet materials in the hot air.

Sketch：Disc continuous dryer is an efficient conductive continuous drying equipment. Its unique structure and working principle determine that it has the characteristics of high thermal efficiency, low energy consumption,

Sketch：The ZPG vacuum rake dryer is a novel horizontal batch vacuum drying equipment. The wet material is evaporated by conduction, and the scraper agitator continuously removes the material on the hot surface,

Sketch：A paddle dryer is a low-speed agitating dryer with a stirring paddle set inside the equipment to make the wet material fully contact the heat carrier and the hot surface under the stirring of the paddle, so as to achieve the purpose of drying.

Sketch：The HZG rotary drum dryer is a cylinder with a slightly inclined main body and adjustable speed within a certain range. The wet material is fed into the cylinder by the feeder,

Sketch：The wet material enters the spiral bed from the top feeding port. Under the action of circumferential excitation force and gravity, the material jumps from top to bottom along the spiral bed to the bottom;

Sketch：The drum dryer is an internal heating conduction type rotating continuous drying equipment. The rotating drum passes through its lower trough, and adheres to a thick material film.